https://www.miningweekly.com
Africa|Construction|Copper|Industrial|Manufacturing|Mining|Pumps|Reinforcing|Services|Surface|Equipment|Maintenance|Manufacturing
Africa|Construction|Copper|Industrial|Manufacturing|Mining|Pumps|Reinforcing|Services|Surface|Equipment|Maintenance|Manufacturing
africa|construction|copper|industrial|manufacturing|mining|pumps|reinforcing|services|surface|equipment|maintenance|manufacturing-industry-term

Using nonoriginal parts only mitigates initial costs

A group of peristaltic hoses which are to be used on OEM Pumps
Mapping:

FLEX IT The Verderflex hose is perfectly suited to Verders Dura pumps Caption 02:

30th June 2023

     

Font size: - +

In a competitive industrial and mining arena, companies are often driven to keep purchase costs as low as possible and resort to fitting nonoriginal-equipment-manufacturer (non-OEM) aftermarket spare parts into sophisticated pieces of equipment, cautions Verder Pumps SA client services Africa lead Reinhard Seidel.

He explains that this approach ultimately undermines the company’s ability to keep up with tight production schedules and ensure minimal downtime.

“The non-OEM aftermarket parts seldom stand up to the rigorous duty that the OEM part was designed for and, ultimately, end up impacting on uptime, resulting in production losses,” he says.

He cites a recent case study at one of the largest copper producers in the Southern African Development Community, in which the hidden costs of buying a “surprisingly expensive low-priced” peristaltic hose were exposed.

For commercial reasons, the mining company chose to fit a non-OEM hose in a Verder peristaltic pump. Production bore the brunt of this commercial decision, as the “surprisingly expensive low-priced” hose failure rate was an average of three failures a week.

“These failures resulted in production stoppages, and increased maintenance and manpower requirements,” he points out.

As a result of the production stoppages, Verder was asked to investigate the reason for the failures. It subsequently presented a simple remedy, namely fitting an OEM hose.

The exercise of buying and fitting the non-OEM hose in an attempt to reduce inventory costs and minimise expenditure proved to be an expensive choice.

Seidel stresses that while non-OEM aftermarket hoses may cost less on initial purchase, using hoses with incorrect dimensions and hoses of inferior construction leads to frequent hose failures, which, in turn, leads to unplanned stoppages, production losses and avoidable maintenance costs.

These direct costs include the replacement of lubricant and premature gearbox failure, owing to the ingress of the pumped media into the gearbox, caused by the burst hose, and the cost of another replacement hose.

The OEM hose was fitted to the DURA Pump and run under the same operating conditions. Records have been kept over this time – to measure the conditions and timing until a potential failure of the Verder OEM hose – and the results have been significant.

The non-OEM hose had failed and been replaced, on average, three times a week. In comparison, the Verder OEM hose – installed on December 1, 2021 – is still in operation, without failure or loss of production throughput.

As such, the cost saving far outweighed any costs saved in installing the non-OEM hose.

Specific Specifications

“Every Verderflex hose is manufactured to rigid specifications for consistent wall thickness, to ensure that the fibre reinforcing is embedded centrally when the hose is constructed,” says Siedel.

Consequently, the precision manufacturing process, mitigates the need to carry out machining of the hose’s outside diameter.

Additionally, the importance of correct pulsation dampeners and other technicalities that affect hose life cannot be understated – just dimensional differences will have an influence on hose life which leads to costs associated with unplanned stoppages.

The Verder hose has a signature textured finish, which enhances lubricant adhesion to the hose, thereby reducing surface friction between hose and shoe.

He explains that for a client to be sure that they are fitting an OEM hose, the client will notice that all Verderflex hoses have a clear colour-coded identification stripe and Verder branding along the length of the hose, indicating the material of construction.

“The construction of the OEM hose plays an integral part in the life span of the hose,” says Seidel.

He concludes that if the hose the client is fitting in its Verder peristaltic pump does not have these markings, the client can be sure that while it may be saving upfront costs by buying cheap, the client will most certainly be buying at least twice.

Edited by Nadine James
Features Deputy Editor

Comments

 

Showroom

Alco-Safe
Alco-Safe

Developed to exceed the latest EN 15964 standards for police breathalysers proving that it will remain accurate and reliable for many years to come.

VISIT SHOWROOM 
Weir
Weir

Weir is a global leader in mining technology. We recognise that our planet’s future depends on the transition to renewable energy, and that...

VISIT SHOWROOM 

Latest Multimedia

sponsored by

Magazine round up | 06 December 2024
Magazine round up | 06 December 2024
6th December 2024

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
PLUS
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?

MAGAZINE & ONLINE

SUBSCRIBE

RESEARCH CHANNEL AFRICA

SUBSCRIBE

CORPORATE PACKAGES

CLICK FOR A QUOTATION







sq:0.176 0.206s - 130pq - 2rq
Subscribe Now