Africa|Aluminium|Automation|Casting|Cleaning|Cleaning Equipment|Design|Efficiency|Energy|Engineering|Environment|Flow|Industrial|Installation|Instrumentation|Mining|PROJECT|Safety|Service|System|Systems|Technology|Terminals|Tubes|Equipment|Flow|Maintenance|Products|Operations
Africa|Aluminium|Automation|Casting|Cleaning|Cleaning Equipment|Design|Efficiency|Energy|Engineering|Environment|Flow|Industrial|Installation|Instrumentation|Mining|PROJECT|Safety|Service|System|Systems|Technology|Terminals|Tubes|Equipment|Flow|Maintenance|Products|Operations

Tech provider upgrades control at Mozal Aluminium

9th August 2019


Font size: - +

Industrial automation and information technology provider Rockwell Automation has migrated the control systems at mining and metals company South32’s Mozal Aluminium project’s furnace assembly and ladle cleaning shop to its modern DC sintering based on the PlantPAx design standard.

An information-rich control architecture based on the Allen-Bradley ControlLogix platform helps to ensure improved long-term plant and process performance and reliability, while also bringing all the latest diagnostic and fault-finding capabilities to these operational areas.

The migration included the rewriting of a new, optimised control philosophy. The result is a streamlined, consistent and coherent input/output (I/O) architecture visualised through the latest human-machine interfaces and FactoryTalk Studio ME software, which delivers intuitive, actionable machine data and intelligence. Service teams now have far greater insight into plant processes, allowing faster, more efficient response to any point of failure through added diagnostic features.

Additionally, both plant areas were upgraded to Device Level Ring EtherNet/Internet Protocol network architectures. This upgrade helped to ensure no single, localised point of failure in the network which can lead to more widespread, unnecessary downtime. The migration, for which Rockwell Automation was responsible for the engineering, product supply, integration and commissioning, was completed in 12 months.

Ladle Shop

The ladle shop comprises three systems – preheating, tube cleaning and ladle cleaning equipment – which deliver rapid and efficient automated cleaning and heating of the ladles, and the distribution tubes that fill them. These systems help to ensure that no bath material and aluminium products can collect in the ladles, which would reduce the integrity of the molten aluminium, and thus the quality of the final cast ingots.

The three upgraded ControlLogix controllers supplied for these systems deliver a rewritten I/O structure built on standards and simplified control functionality. Detailed, real-time visualisation and diagnostics of the operation floor are provided by 16 PanelView Plus 7 graphic terminals with FactoryTalk ME V8.02 software.

The drive system on the tube cleaning equipment was migrated to the Allen-Bradley PowerFlex 755 AC Drive. In addition to optimising energy efficiency, the PowerFlex 755 delivers a holistic level of actionable data that simplifies fault finding and optimises maintenance on the drive system.

“Upgrading the control systems on the ladle shop floor was also an opportunity to provide a complete inspection of the instrumentation layer,” explains Rockwell Automation sub-Saharan Africa lead engineer Devin Whitfield.

“Working with Mozal Aluminium, defective or unreliable equipment was flagged, and related ad hoc items of code added or removed.”

In an effort to ensure minimal disruption on plant operations, each system was completed within a planned three-day commissioning period.

Furnace Assembly

The casting process consists of ten furnaces across five casting lines, which maintain the aluminium at a temperature of approximately 1 000 ºC before feeding it into a launder for casting.

Maintaining the optimum level of aluminium in the launder during casting is critical as filling it too quickly risks molten aluminium being ejected from the launder – a significant safety hazard – while an inadequate flow results in under-cast ingots of inferior weight, size and quality.

Controlling the tilt demand, internal temperature and casting temperature of the furnaces is now achieved via PID control through the ControlLogix platform. The approximately 200 I/O control system automates both the position and speed of the furnace tilt, and integrates with existing third-party furnace subsystems including the burner management systems, tightness control and hardwired safety systems.

To execute the migration without affecting production, Rockwell Automation installed the control system within the casting and maintenance schedule of each furnace.

“With production demand in the cast house requiring four of the five casting lines be active at any one time, and only one of two furnaces casting for each line, we installed and commissioned the control of each furnace in a narrow, time-critical window,” explains Rockwell Automation sub-Saharan Africa project engineer Coenraad Maree.

This required not only a high degree of efficiency and accuracy to help ensure each system migration did not extend beyond scheduled windows, but also a flexible approach in accommodating any changes to the respective schedules.

The biggest installation challenge, however, was that of working in the intense heat of the cast house environment. With ambient temperatures of over 40 ºC, safety of the commissioning teams was a critical consideration.

In addition to the migration of the casting furnaces and the ladle shop to the improved software standard, Rockwell Automation simultaneously executed a plant-wide technology migration of Mozal Aluminium’s drive network to the PowerFlex 755 platform. This project numbers over 350 drives in total, which will be complete in November 2020.

This modern, Connected Enterprise-ready distributed control system helps secure the long-term reliability of the production plant, and amplifies the level of plant and systemwide intelligence available to on-site operation and maintenance teams to improve efficiency and reduce unplanned downtime.

Edited by Zandile Mavuso
Creamer Media Senior Deputy Editor: Features


Latest News

Nickel developer Horizonte’s financing efforts fail
Nickel developer Horizonte’s financing efforts fail
Updated 2 hours 20 minutes ago By: Mariaan Webb


Universal Storage Systems (SA)
Universal Storage Systems (SA)

South African leader in Steel -Racking, -Shelving, and -Mezzanine flooring. Universal has innovated an approach which encompasses conceptualising,...

Weir Minerals Africa and Middle East
Weir Minerals Africa and Middle East

Weir Minerals Europe, Middle East and Africa is a global supplier of excellent minerals solutions, including pumps, valves, hydrocyclones,...


Latest Multimedia

sponsored by

Magazine round up | 12 April 2024
Magazine round up | 12 April 2024
12th April 2024

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?







sq:0.148 0.181s - 94pq - 2rq
1: United States
Subscribe Now
2: United States