Africa|Construction|Dewatering|Environment|Filtration|Flow|Multotec|plates|PROJECT|Resources|System|Technology|Waste|Waste Management|Water|Equipment|Flow|Products|Environmental|Waste|Operations
Africa|Construction|Dewatering|Environment|Filtration|Flow|Multotec|plates|PROJECT|Resources|System|Technology|Waste|Waste Management|Water|Equipment|Flow|Products|Environmental|Waste|Operations

Company’s range increases, improves recovery

TURNKEY SOLUTIONS Multotec supplies turnkey filtration plants to enable end-users to implement a dewatering project cost effectively

GERRIT DU PLESSIS Operations need to maximise and increase process throughputs

20th November 2020

By: Simone Liedtke

Creamer Media Social Media Editor & Senior Writer


Font size: - +

The application of South African minerals processing company Multotec’s technologies in tailings and waste management streams allows for the recovery of resources – such as water, precious metals and by-products – in a way that increases revenue and the manageability of the process, says product specialist for solid/liquid separation Gerrit du Plessis.

The efficacy and stability of the process, which also removes contaminants that are harmful to the environment, is critical for operations, particularly in South Africa, as it is a water-scarce country.

Operations need to increase process throughputs, owing to the reduction of quality ore, says Du Plessis, who adds that, owing to the national water shortage, “it is important to recover water to the best of the technologies’ abilities”.

He suggests using continuous countercurrent ion-exchange product, from Multotec’s Australian partner CleanTeQ Water. The product is often used in combination with other technologies such as membrane reverse osmosis technology.

Multotec’s water-treatment products also include using membrane technology, as well as chemical precipitation, to remove soluble contaminants, recovering more precious metals and improving the quality of water for reuse while reducing reagent consumption.

Final product and tailings process streams can be further concentrated using Multotec’s filter press and centrifuge technologies, a trend that has steadily increased, Du Plessis notes.

However, process equipment used on tailings and waste streams is normally considered a “hard sell”, as operations have a tendency to focus capital on high-value product streams to generate maximum revenue, resulting in waste and tailings streams often being neglected.

“Tailings become more difficult if you consider the decreasing ore grades in some applications. Also, if an operation has a larger volumetric flow of process streams from where the product is recovered, their tailings volumes also increase,” Du Plessis explains, noting that this has often been a deterrent.

However, this is no longer the case, as legislation has stipulated certain controls, and companies have become more aware of the negative impact of environmental pollution, as well as its socioeconomic impact.

Internationally, in some water-scarce areas, tailings dams are prohibited, for which Du Plessis suggests a dewatering-equipment alternative.

“Many companies prefer to have a dewatering facility and use that as a backfill into openpit areas, otherwise they won’t be able to execute the project because they are likely to be delayed in receiving a tailings dam licence,” Du Plessis comments.

Using Multotec’s filter press technology makes a tailings dam licence redundant, as the water is retained on site, recovered is reused in the plant and allows for waste to be discarded or backfilled in a mine pit area, he adds.

To this end, Multotec supplies fully automated filtration technology – that ensures maximum filter cake moisture is achieved so that the product can be used as dry stacked tailings while “guaranteeing” product discharge from filter chambers.

A filter cloth wash system is then implemented to ensure that the cloths are cleaned regularly to maximise the life span of the filter medium and filter plates.

Multotec’s tailings dam cyclone offering is engineered to ensure an optimum volumetric split between the over- and underflow of the cyclone to match the required rate of rise of the tailings dam.

Other products in the company’s versatile product range include a variety of centrifuges.

All these products have fit-for-purpose features, are applied in various process streams and are manufactured using special construction materials to resist corrosion and abrasion.

Edited by Nadine James
Features Deputy Editor




Goodwin Submersible Pumps Africa (Pty) Ltd
Goodwin Submersible Pumps Africa (Pty) Ltd

Goodwin Submersible Pumps Africa is sole distributors for Goodwin electrically driven, submersible, abrasion resistance slurry pumps.


Leading condition monitoring specialists, WearCheck, help boost machinery lifespan and reduce catastrophic component failure through the scientific...


Latest Multimedia

sponsored by

Photo of Martin Creamer
ARM, GoldOre, Gautrain make headlines
22nd September 2023
Magazine cover image
Magazine round up | 22 September 2023
22nd September 2023
Resources Watch image
Resources Watch
21st September 2023

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?







sq:0.131 0.174s - 177pq - 2rq
Subscribe Now