https://www.miningweekly.com
BMG|Business|Design|Gas|Hydropower|Industrial|Industrial Equipment|Installation|Lifting|Mining|Nuclear|Safety|Service|Steel|Surface|System|Turbines|Equipment|Maintenance|Products|Turbines|Bearing
BMG|Business|Design|Gas|Hydropower|Industrial|Industrial Equipment|Installation|Lifting|Mining|Nuclear|Safety|Service|Steel|Surface|System|Turbines|Equipment|Maintenance|Products|Turbines|Bearing
bmg|business|design|gas|hydropower|industrial|industrial-equipment|installation|lifting|mining|nuclear|safety|service|steel|surface|system|turbines-company|equipment|maintenance|products|turbines-person|bearing

Bolt reduces downtime in mining

PERFECT FIT 
Superbolt devices are threaded onto a new or existing bolt, stud, threaded rod or shaft.

PERFECT FIT Superbolt devices are threaded onto a new or existing bolt, stud, threaded rod or shaft.

23rd October 2020

     

Font size: - +

Industrial equipment provider BMG’s Superbolt multi-jackbolt tensioners – part of the Nord-Lock range – are designed to reduce downtime in the mining sector and eliminate unsafe and laborious bolting methods, particularly in harsh operating conditions and in areas with limited working space.

“These multi-jackbolt tensioners, which replace or retrofit nuts and bolts, only require hand or air tools for the installation and removal of any sized tensioner.”

“Bolts need to be easily removable during maintenance procedures, however bolts must resist the loosening effects of vibrations and dynamic loads,” says BMG fasteners division business unit manager Maryna Werner.

She adds that, the quick and efficient bolting method is based on a design which splits one big torque into a number of smaller ones.

Superbolt, which has numerous advantages over conventional bolting products, ensures joints can be tightened with high accuracy, without the need for specialist skills or heavy tooling.

Tightening in pure tension allows higher preloads on the same sized bolt than conventional tightening methods.

“Generating a preload high enough above the separating forces means bolting will not vibrate loose on properly designed joints and the added elasticity increases fatigue life of the bolted joint, which eliminates costly downtime.

“Only small hand tools are required for installation – this means there are no safety hazards from immense hydraulic pressures, no pinching hazards, no lifting of large tools and no risk of sockets breaking under high pressure.”

Werner explains that multi-jackbolt tensioners are easy to install, even in confined spaces and although there are multiple jackpoints to tighten – by using hand or air tools – installation times are faster than other bolting methods.

A conventional bolting system, such as the sledgehammer, gives little control, is inconsistent and can cause injuries. Thermal tightening, crane and hydraulic wrenching and hydraulic tensioning are often costly, inaccurate, time-consuming and unsafe.

Superbolt devices are threaded onto a new or existing bolt, stud, threaded rod or shaft.

The main thread serves to position the tensioner on the bolt or stud against the hardened washer and the load bearing surface.

Once positioned, actual tensioning of the bolt or stud is accomplished with simple hand tools by torquing the jackbolts which encircle the main thread.

Werner points out that the jackbolts transfer the preload evenly into the main thread and consequently onto the joint.

Jackbolts have a small friction diameter and can therefore create a high thrust force, with relatively little torque input. The main thread is tightened in pure tension.

Superbolt tensioners are used in diverse industries, including mining, hydropower, wind turbines, gas and steam turbines, nuclear, steel, shipbuilding, offshore, chemicals and transportation.

“Original-equipment manufacturers specify Superbolt multi-jackbolt tensioners in their design, to improve performance of equipment.

“The high preload capacity and accuracy of this system has resulted in the design of smaller bolt sizes. Compact dimensions and decreased tooling sizes allow for a reduction in the size of machinery, reducing material and machining costs,” says Werner.

BMG offers a technical advisory service to determine the dimensions and load conditions of existing or required bolted joints.

Current tightening methods are evaluated and bolt preloads, for absolute reliability and durability, are calculated by its highly skilled team, Werner concludes.

Edited by Nadine James
Features Deputy Editor

Comments

Showroom

Actom image
Actom

Your one-stop global energy-solution partner

VISIT SHOWROOM 
Schauenburg SmartMine IoT
Schauenburg SmartMine IoT

SmartMine IoT has been developed with the mining industry in mind, to provides our customers with powerful business intelligence and data modelling...

VISIT SHOWROOM 

Latest Multimedia

sponsored by

Hyphen, Eva mine, ferrochrome price make headlines
Hyphen, Eva mine, ferrochrome price make headlines
27th March 2024
Resources Watch
Resources Watch
27th March 2024

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
PLUS
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?

MAGAZINE & ONLINE

SUBSCRIBE

RESEARCH CHANNEL AFRICA

SUBSCRIBE

CORPORATE PACKAGES

CLICK FOR A QUOTATION







sq:0.211 0.254s - 178pq - 2rq
Subscribe Now