https://www.miningweekly.com
Africa|Cleaning|Health|Mining|PROJECT|Proximity|Proximity Detection Systems|Safety|Sustainable|Systems|transport|Equipment|Bearing
Africa|Cleaning|Health|Mining|PROJECT|Proximity|Proximity Detection Systems|Safety|Sustainable|Systems|transport|Equipment|Bearing
africa|cleaning|health|mining|project|proximity|proximity-detection-systems|safety|sustainable|systems|transport|equipment|bearing

Plan of action devised to prevent further fatalities

Minerals Council safety and sustainable development head Sizwe Phakathi

SIZWE PHAKATHI There is a need to be proactive rather than reactive as the industry approaches the last months of the year

28th October 2022

By: Halima Frost

Senior Writer

     

Font size: - +

Mining employers’ organisation Minerals Council South Africa held a special board meeting last month to devise a four-tiered plan of action aimed at preventing fatalities.

The meeting was called was called in response to the worst monthly safety performance reported for the year to date, in August, with eight fatalities.

“There is a need to be proactive rather than reactive as the industry approaches the last months of the year, which are historically associated with an increased number of fatalities,” says Minerals Council safety and sustainable development head Sizwe Phakathi.

The meeting resulted in the formulation of four key steps, the first of which was directed at recommitting to the eight measures agreed to in December 2021.

These measures were introduced following a spate of fatalities after the MineSafe conference, held in November 2021.

The second step addressed planning and resourcing: ensure proper planning, supervisory oversight and adequate team resourcing in people, materials and equipment.

The Minerals Council sought to address the issue of winches by introducing a third step in which it proposed the establishment of a multidisciplinary team to explore alternative ways of cleaning in conventional mines, hoping to drive a ‘no more scraper winches’ initiative.

“This proposal formed part of the outcomes of the Scraper Winches Day of Learning, held on September 15,” says Phakathi.

Finally, trackless mobile machinery was addressed, also at the special board meeting to ensure that controls, such as proximity-detection systems and/or collision-avoidance systems, were effective.

The Minerals Council has committed over R20-million to address transport and mobile machinery risks in support of the December 2023 deadline agreed upon by stakeholders at the Mine Health and Safety Council for the implementation of Chapter 8 regulations focusing on collision prevention systems, Phakathi adds.

Fatal Failings

Phakathi says that as of October 10, 30 fatalities were reported for the year, compared with 38 fatalities during the same period last year.

The majority of fatalities were attributed to general causes such as being struck by falling or rolling rock, inundation, mud-rush and drowning as well as burning, and scalding.

Transportation- and mining-related causes constitute the second- and third-largest group of fatalities respectively, while conveyancing and miscellaneous accounted for the smallest group of fatalities.

Phakathi underlines that the general types of fatalities have, reportedly, been increasing constantly of late.

“There is, therefore, a need to develop intervention programmes to eliminate the causes of ‘general’ fatalities.”

As a result, the Minerals Council has been bold in its interventions, and has launched a five-year R46-million project to address fall-of-ground (FoG) fatalities. Phakathi notes that “it is encouraging that the initiatives to address FoG and transport safety risks have borne, and are still bearing, fruit, but there is still much to be done”.

Zero Harm is achievable, he says, noting that many more companies are achieving significantly longer fatality-free production shifts.

Minerals Council member companies and other industry stakeholders are unwaveringly committed to achieving this aspirational goal of Zero Harm, he concludes.

Edited by Nadine James
Features Deputy Editor

Comments

Showroom

Condra Cranes
Condra Cranes

ISO-certified Condra manufactures overhead cranes, portal cranes, cantilever cranes and crane components: hoists, drives, end-carriages, brakes and...

VISIT SHOWROOM 
SMS group
SMS group

At SMS group, we have made it our mission to create a carbon-neutral and sustainable metals industry.

VISIT SHOWROOM 

Latest Multimedia

sponsored by

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
PLUS
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?

MAGAZINE & ONLINE

SUBSCRIBE

RESEARCH CHANNEL AFRICA

SUBSCRIBE

CORPORATE PACKAGES

CLICK FOR A QUOTATION







sq:0.074 0.101s - 132pq - 2rq
Subscribe Now