https://www.miningweekly.com
Design|Energy|Manufacturing|Pipe|Pipes|PROJECT|Service|SMS|SMS Group|Steel|System|Systems|Technology|Transformer|Welding|Maintenance|Manufacturing |Pipe|Transformer
Design|Energy|Manufacturing|Pipe|Pipes|PROJECT|Service|SMS|SMS Group|Steel|System|Systems|Technology|Transformer|Welding|Maintenance|Manufacturing |Pipe|Transformer
design|energy|manufacturing|pipe-company|pipes|project|service|sms|sms-group|steel|system|systems|technology|transformer-company|welding|maintenance|manufacturing-industry-term|pipe|transformer

Digitalised process takes pipe welding to next level

BETTER AND BETTER
The current revamp project focused primarily on enhancing the repeatability and furthering the development of the welding parameters

BETTER AND BETTER The current revamp project focused primarily on enhancing the repeatability and furthering the development of the welding parameters

6th November 2020

By: Mc'Kyla Nortje

Journalist

     

Font size: - +

Japanese steel manufacturer JFE Steel Corporation has produced the first pipe at its Fukuyama Works in Japan after the successful revamp of its submerged arc welding stands by metallurgical plant supplier SMS group.

The revamp included five-wire submerged arc welding heads, digital inverter welding current sources, and a measured data recording, monitoring and evaluating system, the company said in a press release.

Consequently, the current revamp project focused primarily on enhancing the repeatability and furthering the development of the welding parameters.

At the same time, the revamp of the welding technology was aimed at enabling the development of new welding parameters that would make it possible to vary the welding speed and the energy input into the weld seam.

“These capabilities are particularly important when welding high-strength steels and steel for in-service temperatures well below freezing point of between –10 ºC to –20 ºC.”

The company added that in order to ensure that the revamp fully met JFE’s requirements, prior welding tests were carried out.

Jointly with the welding specialists from JFE, SMS group welded longitudinal-seam pipes from material provided by JFE for this purpose on a five-wire submerged arc welding stand at the Technical University of Berlin in Germany.

The results of these welding tests showed that the SMS group technology was able to ensure compliance with JFE’s exacting demands.

Moreover, given the fact that JFE had previously used only four wires in submerged arc welding, the available space for the new five-wire welding heads was another challenging task of the project.

SMS group solved this challenge by developing a more compact design for the new five-wire welding heads, without any compromise in terms of stability and ease of welding head adjustment and maintenance.

As well as upgrading the outside welding stands from four-wire to five-wire welding, the old transformer-based welding current sources were replaced with the new perfect arc digital current sources from SMS group.

In addition, SMS group established an interface with JFE’s manufacturing execution and plant monitoring system.

These systems exchange production and process parameters during welding to optimise production evaluation, production planning and quality assurance. A special focus of the data transfer solution was to incorporate the data collected in the past into the new systems.

With this upgrade, JFE is consolidating its position as a technology leader in the global market for large-diameter longitudinally welded pipes. This is owed to the higher welding speed and reduced error rate.

“The new technology not only boosts productivity but also ensures that, while maintaining the same speed, less heat – in other words, energy – is input into the material. From the latter JFE benefits particularly when welding high-strength steels.”

 

Edited by Zandile Mavuso
Creamer Media Senior Deputy Editor: Features

Comments

 

Showroom

Booyco Electronics
Booyco Electronics

Booyco Electronics, South African pioneer of Proximity Detection Systems, offers safety solutions for underground and surface mining, quarrying,...

VISIT SHOWROOM 
Multotec
Multotec

Multotec, recognised industry leaders in metallurgy and process engineering help mining houses across the world process minerals more efficiently,...

VISIT SHOWROOM 

Latest Multimedia

sponsored by

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
PLUS
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?

MAGAZINE & ONLINE

SUBSCRIBE

RESEARCH CHANNEL AFRICA

SUBSCRIBE

CORPORATE PACKAGES

CLICK FOR A QUOTATION







sq:0.194 0.233s - 94pq - 2rq
1:
1: United States
Subscribe Now
2: United States
2: