Mining contractor Murray & Roberts Cementation has been awarded a contract by copper miner Palabora Mining Company for a 1 200-m-deep ventilation shaft.
The shaft, with a lined diameter of 8.5 m, will reach a final blind sink depth of 1 190 m before a drop raise takes it to its final depth, according to Murray & Roberts Cementation project executive Braam Blom.
“The duration of this project is expected to be just over three years,” says Blom. “After mobilisation, site establishment and surface civils have been completed, we expect to conduct presinking until the end of 2019, with the use of our special shaft sinking gantry to a shaft depth of 65 m.”
A surface headgear and winder installation will then be constructed from January to March 2020. This will facilitate the slow sink to 200 m and the main sink until February 2022. Canadian shutter and lining methods will be employed. The team is expected to conduct shaft stripping by mid-April 2022 and to disestablish the site by the end of May 2022.
“There will be no stations or other excavations required, so this will help keep the team in a sinking cycle and optimise production levels,” he says. “We will run full calendar operations with 12 hour shifts and cycles of five day shifts, five night shifts and five shifts off.”
A relatively small labour force of 123 people is planned for steady main sinking conditions, with some subcontractors conducting surface piling and civil works for the winder, headgear and other site construction. Shaft drilling itself will be done with two twin-boom Komatsu shaft drill rigs, and mucking by a Komatsu excavator with close to a ton of loading capacity.
“Ground conditions are expected to be a challenge in some areas, as profiled from the cover and core drilling,” says Blom. “However, we have various ways of reducing the risk and downtime during these intersections – such as keeping the shaft lining as close as possible to the shaft bottom.”
Blom highlights that the company continuously improves performance based on lessons learnt from its wealth of previous projects. This allows for a constant focus on securing safe, sustainable and efficient shaft sinking, to deliver on the completion target.
Among the unique benefits offered by Murray & Roberts Cementation is its world-class training facilities at Bentley Park, including mock-up shafts where employees and trainees build up first-hand experience of operating conditions underground.