https://www.miningweekly.com

Metals X lowers Nifty production guidance for Sept quarter

1st September 2017

By: Esmarie Iannucci

Creamer Media Senior Deputy Editor: Australasia

     

Font size: - +

PERTH (miningweekly.com) – ASX-listed Metals X has downgraded production expectations for the September quarter at its Nifty copper mine, in Western Australia, following a temporary suspension of operations in August.

The company on Friday told shareholders that as a result of the temporary suspension of operations, and the subsequent delays in underground stoping since operations were restarted in late August, copper production for the September quarter would be lower than previously anticipated.

The Nifty mine is now expected to produce between 3 600 t and 3 900 t of copper in the September quarter, compared with the 5 939 t delivered in the three months to June.

Since restarting mining, following repairs to the secondary escapeway, Metals X has had to undertake extensive re-drilling of existing production holes in the first of the large stopes, which resulted in delays in bringing the stope into full production.

An additional drill-rig has been redirected from the second large stope to accelerate production drilling, delaying the scheduled start of production from the second stope.

However, MD Warren Hallam noted that despite short-term delays at Nifty, Metals X remained on track to achieve its targeted ramp-up of production to 40 000 t/y by the end of the financial year.

“While this delay has been unfortunate, we are confident that we remain on track to deliver on our 40 000 t/y copper production rate. When we acquired Nifty late last year, the mine had been planned for closure with development and drilling wound down several years earlier.

“Metals X’s objective has been to redevelop the mine as quickly as possible, with our target being the achievement of a production rate of 40 000 t/y of copper by mid-2018.”

Hallam said that the limited number of mining areas, combined with the variability in mining conditions associated with the ‘checkerboard’, have continued to impact on production ramp-up during the current quarter.

“As we develop into new extensions of the deposit and increase the number of available stoping areas, we will be less exposed to unforeseen variations in production.”

Edited by Mariaan Webb
Creamer Media Senior Deputy Editor Online

Comments

The content you are trying to access is only available to subscribers.

If you are already a subscriber, you can Login Here.

If you are not a subscriber, you can subscribe now, by selecting one of the below options.

For more information or assistance, please contact us at subscriptions@creamermedia.co.za.

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
PLUS
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?

MAGAZINE & ONLINE

SUBSCRIBE

RESEARCH CHANNEL AFRICA

SUBSCRIBE

CORPORATE PACKAGES

CLICK FOR A QUOTATION