https://www.miningweekly.com

Ups And Downs Of Applying The ‘Banana’ Screen Design

24th July 2018

     

Font size: - +

This article has been supplied as a media statement and is not written by Creamer Media. It may be available only for a limited time on this website.

Kwatani  (0.02 MB)

While multi-slope screens – also known as ‘banana’ screens – are commonly used in various screening applications, they need to be carefully designed with the specific purpose in mind, according to Kwatani CEO Kim Schoepflin.

“Multi-slope screens have been in use since the 1970s and have a significant reference base, becoming very fashionable mainly because of the benefit they offered in terms of higher velocity leading to higher capacity ,” says Schoepflin.

At the top of these screens is usually a first slope with a deck angle of at least 35 degrees – allowing material velocities of over 3 metres per second – curving down to end at about 10 degrees. This original layout, however, is not always ideal for many operations today.

“When we design a banana screen at Kwatani, we are careful to understand exactly what the application is, so that we can align the number of slopes as well as change the angles of each slope to achieve better efficiencies,” she says. “In this way, we have been very successful placing these designs in diamond and coal applications, mainly in dense media circuits as well as for diamond scrubber plants for degritting.”

Failure to adapt the design appropriately to the application can lead to a number of challenges, says Kwatani COO Kenny Mayhew-Ridgers.

“Material velocity is exponentially linked to the wear rate of the panels, and this high panel wear will lead to frequent and costly maintenance,” says Mayhew-Ridgers.

Another design strategy to reduce panel wear is to create a more continuous curvature profile along the screen, with a higher number of slopes making for a gradual change of direction for material. This is based on the simple principle that the greater the change of direction, the more the panel will wear.

“Insufficient drainage of water can also be an issue at these high deck angles, particularly with apertures of less than 1.0 mm which most are,” he says. “Where retention time on the screen is low, there could be too much carry-over of water to the next phase of processing, with wet product going onto conveyors and into silos, creating various problems related to moisture content.”

Schoepflin highlights that, in dense media processes, it is also important to recover as much of the medium – such as magnetite – as possible, which the steep slope may not allow. To maximise recovery of the dense medium, the slope and material velocity may need to be reduced.

“The feed arrangements are also critical, as the material is being fed onto a steep angle,” she says. “The material needs to be fed at a low velocity onto the screen, and the application of water needs to be carefully controlled.”

A cost aspect that needs to be considered is that the physical height of a banana screen layout can also add to the screen infrastructure, as this structure also needs to be heightened. In addition, this height can make the screen more difficult to access for maintenance purposes. All these factors need to be considered by a user when deciding upon whether a multi-slope screen is optimal and – if it is – exactly how the design needs to be fine-tuned.

Edited by Creamer Media Reporter

Comments

Showroom

Yale Lifting Solutions
Yale Lifting Solutions

Yale Lifting Solutions is a leading supplier of lifting and material handling equipment in Southern Africa. Yale offers a wide range of quality...

VISIT SHOWROOM 
AutoX
AutoX

We are dedicated to business excellence and innovation.

VISIT SHOWROOM 

Latest Multimedia

sponsored by

Hyphen, Eva mine, ferrochrome price make headlines
Hyphen, Eva mine, ferrochrome price make headlines
27th March 2024
Resources Watch
Resources Watch
27th March 2024

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
PLUS
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?

MAGAZINE & ONLINE

SUBSCRIBE

RESEARCH CHANNEL AFRICA

SUBSCRIBE

CORPORATE PACKAGES

CLICK FOR A QUOTATION







sq:0.113 0.149s - 91pq - 2rq
Subscribe Now